PREVIOUS PAGE        HOME PAGE        ORDERING INFO

 

FORK PARTS for C's SHERRy

and MARZOCCHI

STOPS / BOOTS / SEALS / SPRINGS / FENDERS / BRACKETS

NUMBER PLATES / BAR CLAMPS / STEERING RACES

RUBBER WASHERS / SHERRy PARTS

 

Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 4pm E.S.T.

or e-mail us a list of your quantities and part numbers pentonpartsusa@sbcglobal.net

 

     (NOTE: parts are available only while supplies last - prices subject to change without notice)

 

photo showing positioning of label on fork leg

    C's Fork Decals

size 7/8" x 2-1/4", black printing on clear background

#1-00230 - Black printing for forks     $5 pair

 

      also available (not shown)

#1-00311 - white printing for shocks   $5 pair

NOTE: labels may have to be trimmed on top, bottom, and sides before installing.

 

 

A

 

B

 

C

 

 

 

D

C's Fork Cap Parts

 

A-#1-240-022 -     $1 each

           cap screw 

B- #1-240-023 -     $1.50 each

           valve spring

C- #1-88-043 -        $ .20 each

             ball

      #1-503-027 -    $0.60 each

             replacement o-rings for 32mm

      #1-209-022 -    $0.60 each

             replacement o-rings for 35mm

D - #1-209-023 -        $ 1.50 each

            spacer washers for 35mm fork caps

 

 

A

 

B

  35mm Marzocchi Fork Caps

 

A-  #MAR-701007 -     $36 each

          35mm fork cap (old #3280-R17) 

 

B- #MAR-528006 -     $0.60 each

           replacement O-ring

 

A

B

C's Valve & Springs

 

A- #1-209-0610 -    sold out

           stop valve

B- #1-209-0612 -     $3 pack (2)

           replacement spring washers

Valve Rebuild Kit for 35mm C's

for leading axle forks (1976-78)

used in lower part of dampening rod

#1-844-065 -        $13.50 each

Valve Rebuild Kit for 35mm C's

for leading axle forks (1977-78)

used in lower part of dampening rod

#1-999-060 -        $12 each

 

     

      A                 B

C's Oil Drain Screws

A- #0250-112-100 -      $ .40 each

             copper sealing ring

B- #1-88-0511 -            $ .50 each

              drain screw

made in USA

New reproduction

Fork Bumpers
for all Penton motorcycles.

 

# 51-03-090-000 -            $8 each

 

 

 

               

            A                      B                        C  made in USA

Reproduction sherry FORK BOOTS

A - #1-48-000 -                $40 pair
              N.O.S.  (1969-71) 35mm, black
B - # 1-503-093 -              $36 pair
                (1972-73) 32mm boot, black
C - #1-637-09 -                 $38 pair
                 35mm boot, black

 

 

 

         A                              B

Reproduction

MARZOCCHI FORK BOOTS

A - #99-MAR-533001 -       $38 pair
              35mm boots, black
B - #99-MAR-533019 -        $38 pair
               38mm boots, black

made in USA Seal Savers
The modern solution to keep dirt and dust from entering fork seals and causing oil leakage. One size stretches to fit 32mm Sherry forks. (Replaces fork boots)

Available in 3 colors. Washable and reusable.
#1-48-101 Black
#1-48-102 Silver     Only $20 pair
 

 

 

 

 

             A                             B

FORK SEALS for sherry C's

 

A - #1-503-091 -           $6.50 each
             32mm x 7 double lip seal
B - #1-265-0514 -         $6.00 each
             35mm x 7 double lip seal

 

 

 

 

         35mm                           38mm

MARZOCCHI FORK SEALS

#99-MAR-528034 -          $8.50 each
             35mm x 10 double lip seal
#99-MAR-528012 -          $7 each
              38mm x 7 double lip seal
#99-MAR-528035 -          $8.50 each
              38mm x 10 double lip seal
#99-MAR-528053 -          $8.50 each
              40mm x 10 double lip seal
#99-MAR-528055 -          $8.50 each
              42mm x 10 double lip seal

 

Marzocchi

50mm fork seal

rebuild kit

MARZOCCHI FORK SEAL KIT

#99-MAR850/31 -          $98 kit

 rebuild kit for 1997-98 50mm forks

kit includes:  2 seals

2  fork wipers

2 teflon coated slider bushings 50mm i.d. x 25 x 2.5mm thick

2 teflon coated bushings 50mm o.d. x 20 x 1mm thick

2 copper spacers

4 o-rings

2 seal rings

2 chrome washers

will fit 2000 Victory V92SC bikes

 

 

made in USA

Reproduction 

Front Fender Bracket
Stainless steel bracket fits all 1974 to 1976 bikes with 35mm Ceriani forks. Spaces plastic front fender for proper positioning. Extension has a hole to hold front brake cable.

 #54-08-018-000 -           sold out 

NUMBER PLATE BRACKETS

For mounting front number plate to front forks.

Bracket snaps onto front fork tubes and is held

in place with large rubber band (included).

Made of stainless steel to prevent rusting.

#51-01-087-000 -           $20 each 
       bracket for 32mm forks- fits forks with 5-3/8" gap between tubes
#51-01-087-100 -           $20 each 
       bracket for 35mm forks -   fits forks with 5-1/4" gap between tubes
#51-01-088-000 -              $1.50 each
        extra rubber band

Plastic Oval Number Plates

size - aprox. 9" (230mm) x 11" (280mm)

   all have raised rounded edge on front side

#55-01-090-100   Yellow -      $6 each   or

                           3 for $13
#55-01-090-200    White -       $6each   or

                           3 for $13

#55-01-090-300    Green -       $6each   or

                          3 for  $13                      

#55-01-090-400    Red -       $6each   or

                          3 for  $13    

 

 

 

made in USA

STEEL NUMBER PLATES
with rolled beveled edging
unpainted (oiled steel)

size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)

 

#51-01-090-000 -      Temp. out of stock
        Oval steel number plate

 

NOS STEEL NUMBER PLATES
  yellow painted with rolled beveled edging

  good condition with some rust - 2 mounting holes 4-3/8" c to c

size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)

 

 #51-01-090-200 -                 Sold out
        Oval steel number plate  

    NOTE: limited supply available

made in USA

STEEL NUMBER PLATES
with rolled beveled edging
Painted with grey primer

size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)

 

#2-7-001 -                   Temp. out of stock
        for small headlight

made in USA

STEEL NUMBER PLATES
with rolled beveled edging
Painted with grey primer

size - aprox. 8-5/8" (220mm) x 10-7/8" (275mm)

 

#51-01-091-000 -               Temp. out of stock
          for large headlight

 

 

made in USA

reproduction Fork Brace

 for  32mm Ceriani forks - painted grey

 

#51-01-060-000  -     $48 each

 

Handlebar Clamps

 

#1-627-012 -        Sold out

         for  35mm Ceriani forks

         holes measure 30mm c to c

A

B

 

C

D

E

Bolts for Ceriani Forks

 

     Handlebar clamp bolts

A - 0931-060-603  -   $ .45 each

         hex head bolt 6 x 60mm

B - 1-627-013        -   $ .80 each

          hex head bolt 6 x 75mm

     Other bolts

C - 0912-080-303  -   $ .40 each

         allen head bolt 8 x 30mm

D - 0912-080-353   -   $ .50 each

          allen head bolt 8 x 35mm

E - 0931-080-603        -   $ .80 each

        hex head pinch bolt 8 x 60mm for lower leg axle

          A                   B                 C

New reproduction
Steering Head Race kit

#51-01-086-044  -  only $46 each
           includes: 2 inner races, 2 outer races,

                     34 balls, & 2 Viton O-rings
also available separately:
A- #51-01-083-000  -           $12 each

           inner race (for steering head)

             43mm O.D. x 26.5mm I.D. x 5.25mm thick
B- #51-01-085-000         -    $12 each

           outer race (for fork plate & bushing)

              43mm O.D. x 26.5mm I.D. x 5.25mm thick
C- #2-52-100  -                     $2 each

            Viton O-ring

 

A

 

B

 

C

D

RUBBER WASHERS

used under steel washers throughout bike to protect

plastic and painted parts

 

A  #51-05-082-100  -           $ .20 each

        rubber washer         $9.00 per pk/50

 

B  #0021-060-000 -           $ .20 each

         flat washers         $3.00 per pk/50

 

C  #0985-060-003 -           $ .20 each

      6mm  nylock nuts     $4.00 pk/50

 

D  #0933-060-203  -         $ .25 each

      6 x 20mm bolts        $4.00 pk/25

C's Steering Stem threaded bushing

                       Holds outer steering race.

 

#2-48-000 -      $10 each

   31mm dia. for 1968-71 35mm (short) C's

#1-623-042 -       Sold out

    30mm dia. for 1972+ 32 & 35mm C's

Have a question about which part is right for your bike?

Are you ready to place an order?

 

Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 4pm E.S.T.

e-mail -  pentonpartsusa@sbcglobal.net

or Fax us a list of your quantities and part numbers: 216-651-1620