PREVIOUS PAGE          HOME PAGE         ORDERING INFO

 

 FRAME PARTS

for 1981 - 2006

 KTM motorcycles

  Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 4pm E.S.T.

   or e-mail us a list of your quantities and part numbers pentonpartsusa@sbcglobal.net

 

(NOTE: parts are available only while supplies last - prices subject to change without notice)

This is a small sampling of the popular items requested for frame parts.

There are too many items in our inventory to be shown on this web site and there are many items that are not available or exist in small quantities.

Refer to the  KTM Parts Lists to find the drawing of the part you are in need of, write down the part number and call for pricing and an inventory check.

 

Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 4pm E.S.T.

or Fax us a list of your quantities and part numbers: 216-651-1620

nos 1998-2000 Plastic Gas Tank

#503-07-013-000  black   -    $ 140 each

       7.5 liter capacity - for 125 to 380 KTMs

nos 2004-06 SX/ EXC Gas Tank

#590-07-013-500  orange   -    $ 130 each

       8.5 liter capacity

NOS KTM FUEL PETCOCKS

 

 Fits 1979+ KTM / Acerbes plastic gas tanks. Equipped with 1/4 rear spigot. 2 screw mounting plate - comes with Viton sealing 0-ring. On /off / reserve settings.
 - #550-07-005-200-       Sold out

      petcock

 - #550-07-004-000-        $2 each

      extra Viton O-ring

 

 

A

 

B

NOS KTM FUEL PETCOCKS

 

 Fits  plastic gas tanks with brass adapter fitting shown. Equipped with 1/4 rear spigot.
 

 A - #440-07-006-000-        $20 each

      brass adapter fitting for round hole in plastic gas tanks (4 pieces)


 B - #440-07-005-200-        $40 each

      Fuel petcock only

 nos 2000 SX frame

#503-03-001-400    -   $300

           without steering lock body

             (only 1 in stock)

nos 2000 125/ 200 EXC frame

#503-03-001-300    -   $300

           with steering lock body

             (only 1 in stock)

used  Sub Frame

     for 1998 to 2002 KTM 125 / 250 / 300 / 380 SX, MXC, EXC

#503-03-002-044  complete with slight wear  -   $80

#503-03-002-used missing grommets/ nuts   -   $50

  1984 KTM 495 Decal for Swing Arm

#564-03-029-000  -    $10 each

   

Swing Arm for 2 stroke bikes

 

#548-04-030-044 -          new    $525 each

                                      used    $300 each
           for 1998 to 2002 bikes
 

 

Swing Arm for 4 stroke bikes

 

 

#590-04-030-244 -          new    $475 each

                                      used    $300 each
           for 1998 to 2002 bikes

  Rubber Mud Flap

55-08-021-600 -       $20
        for 1979-1980 MC & GS bikes
        fits between air box
        and rear fender - has 3 mounting holes

         made in USA

 nos 420 Lower Chain Guide Block

 fits 1979-80 KTM 420 motorcycles

#560-07-066-000 -        $30

 

  KTM Bottom Chain Guide

fits 1979- KTM 420 swing arm

      1980  KTM 125 / 420

      1981 - 125/ 200/ 350/ 390/ 420/ 495

    NOTE: 125s require guide to be cut to 2nd slot

#560-07-071-000 -        $11

  photo shows top and bottom of chain guide

Upper Chain Guide & Block

fits 1982-85 KTM swing arms

#542-07-067-000 -        $36

Lower Chain Guide

fits 1982-84 KTM 350/500/ 600 swing arm

      1983 125, 250, 420, 495

#542-07-073-000 -        $16

 reproduction Lower Chain Guide Block

fits the following KTM  motorcycles

 1981 250 / 350 / 390 / 420 / 495

 1982 250 / 495 / 350 / 500

 1983 125 / 250 / 420 / 495

 1984 125 / 250 / 420 / 495

#541-07-066-000 -        $40

 reproduction Lower Chain Guide Block

fits the following KTM  motorcycles

below the swing arm before rear sprocket

1985-92   125, 240, 250, 300, 500

#565-07-066-000 -        $40

 NOTE: This item can be used as a substitute

      for the #541-07-066-000 chain guide

Reproduction front Chain Guide

fits top and bottom of swing arm

   for 1984+ 125, 250, 420, 495

 

#543-07-073-000 -        $48

Air Filter by No-Toil
for 1982-84 all models of  KTMs using

the slanted, round, cage shown on left

#543-06-015-000 -        $24

NOTE: cage not included and not available

EBC brake shoes
for 1982 250 & 495 KTMs

#542-09-035-000 -        $30

 

 Ferodo brake shoes

brake shoes for 83-250
and all 1984-85 KTM motorcycles that use

a double-linked brake cams

#543-09-035-000 -        $35
 

Ferodo sintered disc brake pads

for 1985-86 KTMs using Grimeco calipers

#565-13-209-000 -      $30
 

#565-13-209-444 -       $35

Sintered disc brake pads for 1988-89 KTMs
 

Ferodo sintered disc brake pads

for  KTMs

#502-13-209-044 -         $14 pair

 

#532 (copper) sintered brake pads

#502-13-309-044 -          $28 pair

 

Carbon brake pads for "Brembo" calipers

used on 2001-2003 KTMs

#503-13-030-000 -      $24 pair

 

   NOS BRAKE PEDAL

  fits 1981-83 bike frames, all steel, painted red

 #500-03-060-100 -        $30 each

     NOS BRAKE PEDAL

  fits 1983 250MX bikes, all steel, painted gold

 #543-03-060-000 -        $40 each

      NOS BRAKE PEDAL

  fits 1984 125/ 420/ 495 bikes

       1985 125/ 250/ 300/ 500

   aluminum with steel toe cleat

 #501-03-060-000 -        $60 each

 

    NOS BRAKE PEDAL

  fits 1986  500/ 600 bikes

          aluminum with steel toe cleat

 #570-03-060-100 -        $54 each

    NOS BRAKE PEDAL

  fits 1986 125/ 250/ 300/ 350/ 500 bikes

  aluminum with steel toe cleat & ball bearing pivot

 #565-03-060-044 -        $58 each

  NOS BRAKE PEDAL

aluminum with steel toe cleat & ball bearing pivot

 

 

 

    #502-03-060-044 -        $68 each

fits 1987 125/ 250/ 300/ 350/ 500 bike

 

 NOTE: only 1 in stock

   NOS BRAKE PEDAL

aluminum with steel toe cleat & ball bearing pivot

 

 

   #502-03-060-544 -        sold out

fits 1989 125/ 250/ 350/ 500 bikes

     1990  500-600 LC4/ 350/ 500

     1991 125/ 350 500

     1992 125/ 500/ 550

A

B

 

C

D

 

E

F

  Brake Arms for 1975-83 Penton & KTMs

for conicle hub backing plates

 

 A - #52-10-031-300 -        $26 ea

       cam with straight spline, 12mm shaft

 

 B - #52-10-033-400 -        $30 ea

        steel brake arm, flat style, w/ straight spline, open fingers

 C - #52-10-033-500 -        $30 ea

       steel brake arm, bent style, w/ straight spline, open fingers

 

 D - #52-10-033-700 -        $30 ea

       steel brake arm, bent style, w/ straight spline, closed fingers

 E - #52-10-033-800 -        $32 ea

       steel brake arm, straight style, w/ straight spline, closed fingers

 

 F - #52-10-033-600 -        $46 ea

       alloy brake arm, straight style, w/ straight spline, closed fingers

Sprocket for

Conical

KTM rear hub

6.5" I.D.

 

125 MXC 1984-86

MX/DXC/EXC 87-96

 

250/420/495 84-89

350 Enduro/MX 89

500 MX  1988-92

540 DXC  90-91

   600 LC4 Enduro/MX  1989

520 SPROCKETS for 1984+ KTM's

with 6 (8mm counter sunk) bolt holes,

measures 6-1/2" I.D.

 

#543-10-051-045 -  45T    $59 each (alloy)

#543-10-051-048 -  48T    $59 each (alloy)

#543-10-051-049 -  49T    $59 each (alloy)

#543-10-051-050 -  50T    $59 each (alloy)

#543-10-051-051 -  51T    $59 each (alloy)

#543-10-051-052 -  52T      $48 each (steel)

    Please specify steel or alloy    $59 each (alloy)

 

 

 

 

        35mm                         38mm

MARZOCCHI FORK SEALS

#99-MAR-528034 -          $8.50 each
             35mm x 10 double lip seal
#99-MAR-528012 -          $7 each
              38mm x 7 double lip seal
#99-MAR-528035 -          $8.50 each
              38mm x 10 double lip seal
#99-MAR-528053 -          $8.50 each
              40mm x 10 double lip seal
#99-MAR-528055 -          $8.50 each
              42mm x 10 double lip seal

 

 

 

 

       A                              B

Reproduction

MARZOCCHI FORK BOOTS

A - #99-MAR-533001 -       $38 pair
              35mm boots, black
B - #99-MAR-533019 -        $38 pair
               38mm boots, black

 

Marzocchi

50mm

fork seal

rebuild kit

MARZOCCHI FORK SEAL KIT

#99-MAR850/31 -          $98 kit

 rebuild kit for 1997-98 50mm forks

kit includes:  2 seals

2  fork wipers

2 teflon coated slider bushings 50mm i.d. x 25 x 2.5mm thick

2 teflon coated bushings 50mm o.d. x 20 x 1mm thick

2 copper spacers

4 o-rings

2 seal rings

2 chrome washers

     will fit 2000 Victory V92SC bikes

KTM Threaded End BRAKE LINES

#583-13-010-100 for 1997   $60 each

     52" long / 1,290 mm

 

Other Lengths available -  $60 each

 49.5" (1,257mm)   /  50.5" (1,282mm)

 51.5" (1,308mm)   /  59" (1,498mm)

 NOTE: measurements are overall lengths

KTM Open End BRAKE LINES

#583-13-029-100 -  $70 each

    59" long (1,498mm)

 

Other Lengths available -  $60 each

  39" (990mm)

 

 NOTE: measurements are overall lengths

KTM Bend End BRAKE LINES

Other Lengths available -  $70 each

 65" (1,651mm) one end bent 45 degrees, other end straight

 

 

 NOTE: measurements are overall lengths

 

Have a question about which part is right for your bike?

Are you ready to place an order?

 

Call: Al Buehner - (216) 651-6559   Mon-Fri    8:30am to 4pm E.S.T.

or Fax us a list of your quantities and part numbers: 216-651-1620