PREVIOUS PAGE HOME PAGE ORDERING INFO
MAGURA HARDWARE
(NOTE: parts are available only while supplies last - prices subject to change without notice)
Have a question about which part is right for your bike? Are you ready to place an order?
Call: Alan Buehner - (216) 651-6559 Mon-Fri 8:30am to 4pm E.S.T. e-mail me a list of your quantities and part numbers - pentonpartsusa@sbcglobal.net or Fax us: 216-651-1620 |
![]()
A
E |
A-
#51-02-012-000 -
discontinued
by Magura
size 16mm wide x 34mm long
size 12.25mm wide x 48mm long
|
Pivot pin with 15mm long shank |
new style Pivot Pin, Washer & Nut
#51-02-028-044 - discontinued
by Magura NOTE: Pin has 15mm long shank - The threaded hole on old style perch must be drilled to use this pin. |
|
NOS ISDT Pivot Pin & Nut
#3-6-000 - sold out |
A B |
NOS Pivot Pins
A #MAG-008 - $4.00 each 8mm shank/ 26.5mm long/ 6mm thread/ slot head
B #MAG-072 - sold out 6mm shank/ 21mm long/ 5mm thread |
|
NOS
Spacer Washer for Throttle
Replacement part, 32mm O.D. x 24.2mm I.D., 0.5mm thick Magura part no. 407830 #MAG-177 - $ .50 each |
B
C
D |
NOS Cable Holders and Adjusters
A #54-02-004-000 - $8.00 each alloy screw in cable holder for plastic Magura throttles
B #54-02-004-100 - $2.00 each plastic screw in cable holder for plastic Magura throttles
C #MAG-189 - $1.00 each plastic nut for 6mm cable adjusters
D #MAG-002 - $9.00 each bronze alloy 10 x 1mm cable adjusters for BMW 44mm long, for 11mm cable sleeve and 6.2mm I.D. has unslotted adjustment nut |
B
C D
E |
NOS SCREWS
A #MAG-005 - $ .50 each black 4mm counter sink screws 25mm long
B #MAG-001 - $ .50 each 5mm allen head screw, 15mm long
C #MAG-165 - Sold out 5mm slot head screw, 12mm long
D #MAG-033 - $ .50 each 6mm slotted cheese head screw, fine thread, 10mm long
D #MAG-068 - Sold out special slot head screw, 8mm thread, 14mm long |
B
C |
NOS CABLE NIPPLES
A #MAG-022 - $ .50 each or 10 for $4 brass nipple - 8mm long - for 2mm cable Magura part #0720240 B #MAG-010 - $ .50 each or 10 for $4 brass nipple - 13mm long - for 2mm cable Magura part #400040 B #MAG-018 - $ .50 each or 10 for $4 brass nipple - 13mm long - for 2.5mm cable Magura part #400060
C #MAG-003 - $ .75 each felt cable packing 7 x 16 mm |
|
NOS
Sliding Clamp with screw
#MAG-040 - $ 4 each fits Magura model 273 throttle/ brake lever assy size 12mm long x 7.8mm wide x 8.8mm high set screw to pinch up to 1.6mm diam. cable Magura part #0720300 (old #0311680) |
B C D
E F |
NOS CABLE BARRELS
A #MAG-155 - $ .50 each or 10 for $4 brass barrel, 5mm diam x 7.5mm long, for 2mm cable Magura part #0720249 B #MAG-037 - Sold out steel barrel 8mm diam x 9mm long
C #MAG-076 - Sold out brass barren 8mm diam x 9mm long, wide slot Magura part #0720230 D #MAG-036 - Sold out chrome barrel 8mm diam x 9mm long, slit open end
E #MAG-035 - Sold out steel barrel, 10mm diam head, 8mm shank x 14.5mm long, open end (Magura part #0720233) F #MAG-069 - saddle $ 4 each steel barrel, 12mm diam x 11.5mm long (for BMW brake cables Magura part #411770) |
A
B |
NOS Throttle Cable Parts
A #MAG-118 - $ 2 each BMW cable abutment bushing, 11mm diam. x 12mm long
B #MAG-006 - $ 2 each replacement single cable pull for throttle
|
A
B |
Clamps
A #MAG-185 - $ 2 each zinc plated steel - 34mm eye to eye
B #MAG-014 - $ 2 each zinc plated steel - 1 bolt hole |
A
B
C
D E |
NOS Model 157/5 BMW Throttle
Parts
(pre 1981) Replacement parts for 157.4/5 throttle A #MAG-062 - grip - $9 each B #MAG-058 - housing - $32 each C #MAG-065 - double cable cam - $18 each D #MAG-063 - cover plate - $9 each E #MAG-067 - c-sunk screw - $ .75 each |