for 1972-73 Penton 175 bikes with cush drive rear wheels

#51-03-060-000 - new old stock     $46 each

         also

#51-03-060-USED - used pedals   $40 each

  USED Rear Brake Anchor Rod 

 for 1972-73  CMF 175/ 250s

  may have rust and require painting

#51-03-078-USED -    anchor rod   $23 each

A

B

A - #54-03-070-000  plated brake rod for 1973-75 bikes (25" 637mm long) - Sold out

                        fits the #54-03-160-100  brake pedal 

                        NOTE: only 1 left in stock

B - #55-03-070-600  plated brake rod for 1979 bikes (25.5" 650mm long) -  $48 each

                                fits the #55-03-060-000/ 100 & #55-03-060-500 brake pedals

                                NOTE: only 1 left in stock

 Reproduction BRAKE ROD Parts for 1973-75 bikes with conicle rear hub

      A                           B         made in USA                        C             C

A - # 6-9-000 -  adjustment  nut for brake rods          $5 each
B - #32-03-073-000 -  pressure spring for brake rods  (6.5mm I.D. x 108mm L)    $3 each
C - #31-03-061-000 -  nylon brake pedal bushing             $8 each
                    

  USED Brake Pedals  

 for 1973-75 conicle hub bikes 175/ 250/ 400

#54-03-160-USED -     GC   $40 each

   chrome blistered with rust - might be slightly bent

  NOTE: pedal shown in photo is not what is available 

   Brake Pedal Spring

 for 1973-75 conicle hub bikes 175/ 250/ 400

#54-03-062-000 -  spring     $8 each

   fits the #54-162-100 brake pedal

A

B

C

D

E

 Alloy Brake Pedal

 for 1977-78 MC-5 and GS-6 bikes 125/ 175/ 250/ 400

A - #55-03-060--000 -  short pedal       $36 each

B - #55-03-062--000 -  long spring       $9 each

C - #55-03-060--100 -  short pedal       $35 each

D - #55-03-062--100 -  short spring       $7 each

E - #55-03-061--000 -  bronze bushing      $3 each

A

B

C

 Alloy Brake Pedal

 for 1979-80 MC-80 and GS-80 bikes 125/ 175/ 250/ 400 / 420

A - #55-03-060-500 -   pedal assy      $60 each

B - #55-03-065-000 -   spring for end      Sold out

C - #55-03-066-000 -   pedal end      $10 each

also available - #55-03-061-000 bronze bushing   $3 each

Rubber pipe mount assembly

#51-05-062-000 -       $13 each
       complete with washers, self lock nut, and bolt
 

 for 1972-73 175 engines

may have rust and require painting

#51-03-023-used -  side stand     $ 38 each 

    used Side Stand

 for 1973-74 CMF frames, may have rust and require painting

#51-03-023-used -  side stand     $ 46 each 

#31-03-021-000 -  spring   $ 12 each

        stainless steel spring for side stand

   new bushings, powder coated, like new

   has lower side stand bracket (no nylon bushings)

  #52-03-030-used -       $300 each

    NOTE: only 1 in stock

    with bushings - side stand bracket is missing 

    sold as-is, has rust and will need painting - NOTE: only 1 in stock

  #52-03-030-used -       $200 each 

    with swing arm bushings NOTE: only 1 in stock

  #51-03-030-644 -       $350 each 

   New with needle bearings, inner sleeve, and nuts

  #54-03-030-000 -       $350 each

    NOTE: only 1 in stock

   used with needle bearings, inner sleeve, and nuts

   needs painting, has some rusting

  #54-03-030-used -       $200 each

   used with needle bearings, inner sleeve, and nuts

   partial painted, needs repainting, no rust

  #55-03-030-used -       $200each

    NOTE: only 1 in stock

  Reproduction

  Swing Arm Bushings

for all 175 CMF frames 1972-1973 having cush drive sprocket

 - #51-03-031-000 -          Sold out

Reproduction
 Swing Arm Bolt

Fits all 1972-1980 bikes. Redesigned cap that is extra long and slotted to fit 12mm open end wrench for installing and removing.

 - #51-03-033-000 -         $70 each

 Replacement

  Swing Arm Bearings

  for all  CMF frames 1973-1980 having conicle rear hubs

 - #54-03-097-000 -  needle bearings    $13.50 each   

     #0770-022-140  o-rings (4 required)  $0.30 each

Reproduction
 Inner Swing Arm Bolt and Nuts

  Fits all 1973-1980 bikes having comicle rear hubs

 - #54-03-032-000 -  inner bolt       $80 each

 - #54-03-034-000 - nut       $14 each

 - #0770-022-140 -  o-ring (4 required)   $0.30 each

A

B

C

    new and used Brackets

A - #52-03-145-000 -          sold out
            232mm eye to eye -w/ counter sink hole
B - #54-09-042-400 -          $12 each

             170mm eye to eye - front brake anchor
C - #54-03-078-400 -          sold out
             205mm eye to eye -

       #54-03-045-200 -           $ 12 each
             190mm eye to eye

NOTE: new brackets will be supplied as long as supply lasts, then used will be supplied

New – reproduction
LEATHER TOOL BAG
for PENTON motorcycles - fits Tool Bag Rack

                                               made in USA

#51-11-060-000 -            $82 each
     approximate size 8-1/4" wide x 6" deep x 5" high

          A                     B                      C

New reproduction
Steering Head Race kit

#51-01-086-044  -  only $60 each
           includes: 2 inner races, 2 outer races,

                     34 balls, & 2 viton O-rings

also available separately:
A- #51-01-083-000  -           $20 each

           inner race (for steering head)

     43mm O.D. x 26.5mm I.D. x 5.25mm thick
B- #51-01-085-000         -    $20 each

           outer race (for fork plate & bushing)

     43mm O.D. x 26.5mm I.D. x 5.25mm thick
C- #2-52-100  -                     $2 each

New reproduction Fork Bumpers
for all Penton motorcycles.

# 51-03-090-000 -            $8 each

                        made in USA

Reproduction Rubber Buttons

Fit into frame holes to cushion the gas tanks

 - #51-07-069-100-        $4.00 each  

A

B

C

D

RUBBER WASHERS

used under steel washers throughout bike to protect

plastic and painted parts

A  #51-05-082-100  -           $ .20 each

        rubber washer         $9.00 per pk/50

B  #0021-060-000-P -           $ .20 each

         flat washers         $3.00 per pk/50

C  #0985-060-003-P -           $ .20 each

      6mm  nylock nuts     $4.00 pk/50

D  #0933-060-203-P  -         $ .25 each

      6 x 20mm bolts        $4.00 pk/25

REAR SHOCKS

13” E to E shock for show bikes or easy riding.

      Not for off-road or competition use.

#51-04-010-200 -            Only $90 pair
         Includes 4 bolts, nuts, and bushings.
 

 Head Light Plastic Number Plates

size - aprox. 9" (230mm) x 11" (280mm)

   all have raised rounded edge on front side

#55-01-090-500   Yellow -      $8 each   

                          
#55-01-090-600    White -       $8 each 

Plastic Oval Number Plates

size - aprox. 9" (230mm) x 11" (280mm)

   all have raised rounded edge on front side

#55-01-090-100   Yellow -      $6 each   or

                           3 for $12
#55-01-090-200    White -       $6each   or

                           3 for $12

#55-01-090-300    Green -       $6each   or

                          3 for  $12                      

#55-01-090-400    Red -       $6each   or

                          3 for  $12  

Rubber mud flap fits 1976 and 77 Penton and KTM MC5 bikes
attaches to frame and Falk inner fender
#55-08-021-000 -       $15 each