PREVIOUS PAGE HOME PAGE ORDERING INFO
MAICO Parts
FOLDING SHIFT LEVER / FENDERS / SPOKE KIT
Call: Al Buehner - (216) 651-6559 Mon-Fri 8:30am to 4pm E.S.T.
or e-mail us a list of your quantities and part numbers pentonpartsusa@sbcglobal.net
(NOTE: parts are available only while supplies last - prices subject to change without notice)
Top View - aprox. 7" wide |
Side View - aprox. 19" long |
FALK plastic rear fenders for MAICO #99-HP-323 yellow unbreakable plastic - $40 each
|
Schier Kontakte Contact Points NOS replacement points (ULZ 115/1Z) (ULZ 126/2Z) for:
MAICO - 1955-64 175GS/ M250B / M250S Blizzard models 250GS / 350GS / 360GS #99-2729-Schier - $10 each Will also fit: 1950 - 1960 2-stroke motorcycles and scooters NSU - 1960-up with Bosch magneto LUX / MAX / Consul Victoria - Bergmeister (left hand) Zundapp - 1953-55 150 / 175 / 200 / 250 |
||
HI-POINT heavy duty spoke kit
for MAICO kit includes spokes and nipples for conicle rear hub to 17" rim #99-HP-61500 17" spoke kit $20 per kit |
||
D
B
C
A |
Gas Tank Parts
A-
#51-07-010-000 -
$8 each |
|
Head Light Plastic Number Plates size - aprox. 9" (230mm) x 11" (280mm) all have raised rounded edge on front side #55-01-090-500 Yellow - $8 each |
||
Plastic Oval Number Plates size - aprox. 9" (230mm) x 11" (280mm)
#55-01-090-100 Yellow - $5 each or 3 for $15 #55-01-090-200 White - $5 each or 3 for $15 #55-01-090-300 Green - $5 each or 3 for $15 #55-01-090-400 Red - $5 each or 3 for $15 Black Oval - sold out
|
||
Plastic Rectangular Number Plates small size - aprox. 10" x 7-1/4"
#55-01-090-021 Yellow - $5 each
#55-01-090-022 White - $5 each
#55-01-090-023 Green - $5 each
#55-01-090-024 Red - $5 each
#55-01-090-025 Black - $5 each |
||
|
Plastic Rectangular Number Plates large size - aprox. 12" x 10"
#55-01-090-031 Yellow - $7 each
#55-01-090-032 white - $7 each
#55-01-090-033 Green - $7 each
|
|
NUMBER PLATE BRACKETS For mounting front number plate to front forks. Bracket snaps onto front fork tubes and is held in place with large rubber band (included). Made of
stainless steel to prevent rusting. |
||
REAR SHOCKS 13” E to E shock for show bikes or easy riding. Not for off-road competition use.
#51-04-010-200 -
Only $104 pair |
||
A
B C D |
RUBBER WASHERS used under steel washers throughout bike to protect plastic and painted parts
A #51-05-082-100 - $ .25 each $9.00 per pack/50
B #0021-060-000P - $ .20 each flat washers $3.00 per pk/50
C #0985-060-003P - $ .20 each 6mm nylock nuts $4.00 pk/50
D #0933-060-203P - $ .25 each 6 x 20mm bolts $4.00 pk/25 |
|
Rubber Mud Flap For Front Fenders Mud flap used on motorcycles with aluminum front fenders. Top of mud flap measures 3.5" wide x 6" long Two 6mm
mounting holes on top for bolting to the fender. |
||
Have a question about which part is right for your bike? Are you ready to place an order?
Call: Al Buehner - (216) 651-6559 Mon-Fri 8:30am to 4pm E.S.T. or E-mail us a list of your quantities and part numbers: pentonpartsusa@sbcglobal.net |