Wassel Fork Seal

  for 32mm Metal Profile forks

#WAS-01-3245 -        $8 each   

   Handlebar U-bolts

  clamps handlebar to upper triple clamp   2 required  

#WAS-02-004  -             $3 each

 Wassel Metal Profile Fork Caps

  2 piece - threaded cap + metal spring holder

 #WAS-01-503  -        $30 each
       

  Swing Arm Bushings

  Made of special nylon I.D. 14mm O.D. 31.8mm

#WAS-03-031    $28  each
      
 

A

B

 C

   Foot Peg Springs
 

  A  #WAS-03-041   -  left Side  - sold out
 

  B  #WAS-03-141   -  Right Side  - $4.50 each

  C  #WAS-03-043   -  spacer bushing  - $1.50 each

   VDO Cable

     for 16mm VDO to 12mm drive unit on Sachs engine

  #2-34-000 -          $42 each

        also for all 1968 thru 1975 Penton/ Sachs/ DKW bikes

 Metal Splash Pan

     for under gas tank

#WAS-03-052   -      $23 ea                 

  NOTE: some corrosion of metal on wide end

         for bolting front of Sachs engine to frame

  #WAS-04-004 -         Sold out

  Exhaust Flange Plate

  Thick plate that secures exhaust pipe to Sachs alloy cylinders

#WAS-06-052    -   $10 each
 

  90 degree Petcock Fittings

#WAS-07-005  -           $4 each

  Spring for Chain Tensioner

  #WAS-07-067 -         $7 each

  Front Fender Bracket 

    Polished aluminum with 2 rubber bushings and bolts

#WAS-08-011 -    - $38 each

  Hub Spacer Bushing

     steel bushing between the wheel bearings in the center of the hubs

#WAS-09-011  -           $2 each.
 

    #WAS-09-036  -         $4 each

  Brake Shoe Circlips

   circlip to secure each shoe to stud in backing plate

#WAS-09-975 -             $0.50 each

A

B

C

D

   Rear Axle Parts

 A - #WAS-10-084 -     $5 each

    Left Side snail adjuster

 B - #WAS-10-085 -       $27 each

   rear axle

 C - #WAS-10-066 -        $1 each

   axle nut

A - #WAS-10-184 -     $5 each

    Reft Side snail adjuster